Having trouble spraying cold process materials?

by

With Winter right around the corner, you may be noticing that you’re not getting the same spray results as you were the last time you had your spray rig on the job.  “Material is the same, spray tips and spray bars and hoses are the same, it’s the same pump, it’s the same crew…something must be wrong with my pump!”  Before you take your rig in to get re-packed, have you thought about the effects of the weather on the viscosity of the materials you’re spraying?

During the summer months, when the sun is blazing and the nights never get “crisp”, your materials probably maintain a relatively viscous state, and you’re able to spray from the moment you step on the job until the day is done.  In winter, the cold can turn what once sprayed like water into a drum full of mud.  Your pump may initially prime with some effort, but before long will be sucking air and you’ll be scratching your head.

There are several alternatives to get you back up and running.  If you’re running a high volume job, the WarmMaster may be a job saver.  The WarmMaster is an in-line heat exchange unit that warms cold process material as it is pressure-pumped from your material pump to the roof. It eliminates the torching or overheating of material without thinning or diluting with solvents. The WarmMaster may be used with any air or hydraulically powered pump.

If you have smaller jobs, you can add Drum Heaters or Pail Heaters.  For larger 55 gallon drums, the Drum Heater comes with a 3″ wide strap and 6′ power cord. For prewarming cold process drums. For use on METAL drums ONLY! Place on bottom of OPEN drum for best heat transfer and to allow for expansion of material as it is warmed. There is also a Thermostat option for this Drum Heater that has a 50 degree F to 425 degree F temperature range.

There are also 5 gallon Pail Heaters, also available with a Thermostat.

Advertisements

Tags: , ,

One Response to “Having trouble spraying cold process materials?”

  1. Having trouble spraying cold process materials? | Roofaholic.com Says:

    […] full post on Always On Top Tags: cold, Having, Materials, Process, spraying, Trouble Posted in Roofmaster […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: